Radio Reception
Tuning to a weak radio station q Press à or á briefly and repeatedly until the optimal reception is found. To stop storing the manual preset q Press � on the system. Notes: � If you attempt to store more than 40 preset radio stations, "PROGRAM FULL" will be displayed. � During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically.
Changing Tuning Grid
In some countries, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz. Changing the tuning grid will erase all previously stored preset radio stations.
E n g l i s h
1 2
Disconnect the system from the AC power supply (pull out the AC power cord). While holding down TUNER and á on the system, reconnect the system to the AC power supply. � The display will show "GRID 9" or "GRID 10". Notes: � GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively. � The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.
Tuning to Preset Radio Stations
q Once you�ve preset the radio stations, press à or ë to select the desired preset number. � The preset number, radio frequency, and waveband will appear on the display.
Erasing a Preset Radio Station
Press à or ë to select the preset radio station to be erased. 2 Press and hold �on the system until �PRESET DELETED� appears on the display. � The radio frequency remain on the display. � The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one. q Repeat steps 1�2 to erase other preset radio stations.
1
For Recording, please refer to �Tape Operation/Recording�.