PHILIPS FW-V28/21M
Manual de Usuario

RECORDING
Note: � During recording, it is not possible to listen to another source.

CLOCK
VCD/CD Synchro Start
VCD MINI HIFI SYSTEM

DSC
O

NH

AL IM
T

J A

deck 1 and a blank tape into tape deck 2 with full spool to the left. 3 Press DUBBING � "DUB" with "2" scrolling right will be displayed. � Dubbing will start immediately. � The REC flag starts flashing. 4 Press � to stop dubbing.

the tracks are recorded according to the order on the selected disc. 3 Press RECORD to start recording. � The REC flag starts flashing. � Disc will start playback automatically. 4 Press � to stop recording.

DIGITAL SOUND CONTROL

PROGRAM RECORD DUBBING A.REPLAY

SEARCH

STOP� CLEAR PLAY� PAUSE PREV DIM

CK

TE

C

O P

O

MICROPHONE - LEVEL

PBC

View Clock
You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (VCD, TUNER, etc.). The clock will be displayed for about seven seconds. � Press CLOCK�TIMER briefly. � "10:38 PM or 22:38" (the current time in either 12- or 24-hour mode) will be displayed depending on whether you have selected 12- or 24-hour mode. � "--:--" will be displayed if the clock is not set.

Clock Setting
The clock can be set in either 12- or 24hour mode, e.g. "12:00 AM" or "00:00". Before setting the clock, you must be in the View Clock mode. 1 Press CLOCK�TIMER to select clock mode. 2 Press PROGRAM to select 12- and 24hour mode. � If 12-hour mode is selected, "12:00" starts flashing and the AM lights up. � If 24-hour mode is selected, "00:00" starts flashing. 3 Set the hour with à or á on the system. 4 Set the minute with í or ë on the system.

Notes: � At the end of side A, flip the tapes to side B and repeat the procedure. � Dubbing of tapes is only possible from tape deck 1 to tape deck 2. � To ensure good dubbing, use tapes of the same length. � You can listen to other source while dubbing.

22

Untitled-1

22

D B B

31/05/2001, 11:35 AM

v

v v

English

Recording
1 Load a blank tape into tape deck 2 and a disc into a disc tray. 2 Press VCD to select VCD/CD mode. � You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing VCD (CD 1�2�3) and
STANDBY-ON

Dubbing tapes (from tape deck 1 to tape deck 2) 1 Press TAPE ( TAPE 1�2 ) to select tape deck 2. 2 Load the prerecorded tape into tape

VCD PAL/NTSC

CD1 � 2 � 3

TUNER
TUNING
v v

BAND

TAPE 1 � 2 TAPE

VIDEO AUX

PRESET

v

Z Z
NEXT

R

RETURN CLOCK�TIMER

VOLUME

3139 116 20021