DOLBY PRO LOGIC
When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound. � Press DPL (PRO LOGIC) repeatedly to select and cycle through the various sound modes.
DPL TEST T
This setting is for a full Dolby Surround Pro Logic mode. � Press DPL to select the Dolby Surround mode. � The message "DOLBY LEFT CENTER RIGHT SURROUND" will be SURR SURR displayed. � The DPL display panel will light up.
Use this setting when full surround is not required, but a wide stereo sound is desired. It only requires the left, right and center speakers. � Press DPL to select the Dolby 3 Stereo mode. � The message "DOLBY 3 LEFT CENTER RIGHT STEREO" will be displayed. SURR SURR � The DPL display panel will light up.
PRO LOGIC
Dolby Surround � Dolby Center Phantom � Dolby 3 Stereo � Stereo � Dolby Surround �
� The Dolby Pro Logic display panel will light up with the selection.
Dolby Center Phantom
This setting is for use without the center speaker. It redistributes the center speaker sound to the left and right speakers, providing conventional stereo across the front. � Press DPL to select the Dolby Pro Logic Center Phantom mode. � The message "DOLBY LEFT CENTER RIGHT CENTER PHANTOM" will be SURR SURR displayed. � The DPL display panel will light up.
Normal Stereo
This setting is for normal stereo sound without Dolby Pro Logic. It only requires the left and right speakers. � Press DPL to select the Stereo mode. � The message "STEREO" will LEFT CENTER RIGHT be displayed. � The DPL display SURR SURR panel will light up.
pg 01-31/P88/22-Eng
9
3/6/00, 1:26 PM
3139 116 19721
English
9
Dolby Surround
Dolby 3 Stereo
Important! 1 For the best Dolby Pro Logic sound, switch on DPL with DSC set to �Classic� and with VEC off. 2 Dolby Pro Logic mode will automatically switch to normal Stereo mode when headphones are connected. 3 Switch to normal stereo mode when you record on a tape.