|
Usuarios conectados
Actualmente hay 6043 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Tape Operation/Recording
To change the playback side on tape deck 2 only G Press à or ë. � The A (BACK) or B (FRONT) will appear on the display, depending on the tape side selected. To change the playback mode on tape deck 2 only G Press AUTO REVERSE repeatedly to select the different playback modes. å : playback on one side of the tape only. � : both sides are played once. � : both sides are played repeatedly, up to 10 times each side unless you press�. To rewind or fast forward during playback G Press and hold à or á until the desired passage is reached, then release. � The tape continues playing. G The tape will stop automatically at the end of the rewinding or fast forwarding. � During searching, the sound is reduced to a low volume. To rewind or fast forward when playback is stopped
General Information on Recording
G For recording, use only tape of IEC type I (normal tape) or IEC type II (Cr02). G The recording level is set automatically, regardless of the position of the Volume, VEC, DSC and so forth. G The tape is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for six to seven seconds. G To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
G If �CHECK TAPE� is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening. Do not cover the Cr02 tape detection hole when covering the tab opening.
1 2
Press à or á. Press � when you reached the desired passage. Note: � During rewinding or fast forwarding of a tape, it is also possible to select another source (CD, TUNER or AUX, for example). IMPORTANT! � Recording is permissible if copyright or other rights of third parties are not infringed upon. � Recording is possible only on tape deck 2. � Switch off Dolby Pro Logic when recording.
Preparation for Recording 1 2 3
Press TAPE (TAPE 1�2) to select TAPE 2. Load a recordable tape into tape deck 2. Press à or ë to select the recording tape side. � A appears on the display for the reverse side. � B appears on the display for the forward side. 25
pg 001-032/P880/37-Eng 25 12/8/00, 1:54 PM
3139 115 20421
E n g l i s h
|
|
|
> |
|