PHILIPS FWM390/21M
Manual de Usuario

CD/MP3-CD Operations
Loading discs 1 2
Press OPEN�CLOSE to open the disc tray. Load up to two discs on the individual disc trays. To load the third disc, press DISC CHANGE. � The disc tray will rotate until the empty tray is ready for loading. To interrupt playback G Press � . � � The current track time flashes. G To resume playback, press � again. � To stop playback G Press �. For MP3-CD G During playback, press DISPLAY to show the album and title name.
2
1
1

Replacing discs during playback 1
Press DISC CHANGE. � The disc tray will open without interrupting current playback. To change the inner disc, press DISC CHANGE again. � "DISC CHANGE" is displayed and the disc will stop playing. � The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible.

3

Press OPEN�CLOSE to close the disc tray. � "READING" is displayed. The selected disc tray, total number of tracks and the playing time will appear on the display. � A lighted button indicates that a disc is loaded on the disc tray. � For MP3 disc, the name of the first album and title will be scrolled through the display once and followed by "AXX TXXX". Notes: � Load the discs with the label side facing up. � To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. � For MP3 disc, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.

2

Selecting a desired track/passage
To search for a particular passage during playback G Press and hold à or á and release it when the desired passage is located. � During searching, the volume will be reduced. To select a desired track G Press í or ë repeatedly until the desired track is displayed. G If playback is stopped, press � to start � playback.

Playing discs
To play all discs on the disc tray G Press � . � � All the available discs will play once, then stop. � During playback, the selected disc tray, track number and elapsed playing time of the current track are displayed. � For MP3 disc, TITLE is shown. For mixed mode discs, only one mode will be selected for playback depending on the recording format. To play the selected disc only G In CD mode, press DISC 1/2/3 (or CD DIRECT 1/2/3 on the remote control). � The selected disc will play once, then stop.

17

English

2