Clock setting
The clock can be set in either 12-hour or 24-hour mode ("AM 12:00" or "00:00" for example).
Timer setting
The system can switch on to CD or TUNER mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! � Before setting the timer, ensure that the clock is set correctly.
1 2 2 3 4
In standby or view clock mode, press CLOCK on the remote control once. In other source mode, press CLOCK twice. Press PROGRAM on the remote control to select clock mode. Press à or á repeatedly to set the hour. Press à or ë repeatedly to set the minute. Press CLOCK again to store the setting. � The clock starts working.
1
In standby mode, press and hold SLEEP (TIMER ON/OFF) on the remote control for more than two seconds to select timer mode. � The last timer setting starts flashing. � The selected source will be lighted.
2
To exit without storing the setting � Press STOP �on the system. Notes: � The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs. � During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically.
Press CD 1/2/3 or TUNER to select the desired source. � Before setting timer, make sure the music source has been prepared. CD � Load the disc(s). TUNER � tune to the desired radio station.
3
Press à or á repeatedly to set the hour for the timer to start.
