Clock/Timer
4 5
Press à or ë repeatedly to set the minute for the timer to start. Press CLOCK�TIMER to store the start time. To check the remaining length of time after sleep timer is activated � Press SLEEP (TIMER ON/OFF) once. To change the preset sleep timer � Press SLEEP (TIMER ON/OFF) again while the remaining sleep timer is shown. � The display will show the next sleep timer options. To deactivate the sleep timer � Press SLEEP (TIMER ON/OFF) repeatedly until "OFF" is displayed, or press STANDBYON (B). Note: � will start flashing when the remaining length of time after activation of the sleep timer is less than 1 minute.
English
� At the preset time, the selected source will play. To exit without storing the setting � Press STOP � on the system. Notes: � When the preset time is reached and the selected disc tray is empty, the next available disc will be selected. If all the disc trays are not available,Tuner will be selected automatically. � During timer setting, if no button is pressed within 25 seconds, the system will exit timer setting mode automatically. To deactivate the TIMER � Press and hold SLEEP (TIMER ON/OFF) on the remote control. � The display will show "OFF" and will disappear from the display. To activate the TIMER � Press and hold SLEEP (TIMER ON/OFF) on the remote control. � The last set timer information will be shown for a few seconds and will appear on the display.
Sleep timer setting
The sleep timer enables the system to switch to standby mode automatically at a preset time.
1
2
Press SLEEP (TIMER ON/OFF) on the remote control repeatedly to select a preset time. � The selections are as follows (time in minutes): 15 � 30 � 45 � 60 � OFF � 15 � When you reach the desired length of time, stop pressing the SLEEP (TIMER ON/OFF) button. � is shown, except for "OFF" mode. � The sleep timer is now set.
