DISMANTLING INSTRUCTIONS
Dismantling of the Cassette Cover
Pull out
Press and hold it between the tape deck and the cassette door
Lift up and out
Figure 2 Figure 1
Figure 4
Dismantling the 3CDC Module 1) Loosen the 4 screws, slide Cover top (pos 255) towards the rear and remove it upwards. 3) Push the gear slowly towards the front as shown in figure 3 until the CDC tray starts to move out of the Front Cabinet. The CDC tray is now disengaged and can be pulled out completely. 4) Remove the Cover Tray as shown in figure 4. 5) Loosen 4 screws A to remove the CDC Module (pos 1105) as shown in figure 3.
Dismantling of the Cover Front Display and Cover Front Ornamental (pos 130) 1) Remove the Volume knobs as stated in Dismantling the Cover Front Display in Figure 5. Notes: There is nothing are sandwiched between the Front Cabinet (pos 101) and Cover Front Display (pos 129) but it has to be removed in order to reach the catches for the Cover Front Ornamental (pos 130) .
A
Pull out
A
Turn the gear towards the front till the CDC tray starts to open