PHILIPS FWC80C/37
Manual de Usuario

24
5 Press CLOCK/TIMER again to store the setting. � The clock starts. � To exit without storing the setting, press � on the system. Notes: � During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. � When a power interruption occurs, the clock setting is erased.

TIMER
1 Press and hold CLOCK/TIMER for more than two seconds to select timer mode. � "AM 12:00" or "00:00" or the last timer setting starts flashing depending on whether you have selected 12- or 24-hour mode. � The TIMER starts flashing. � The selected source is lit while other available sources are flashing. 2 Press CD, TUNER or TAPE to select the desired source. � Before selecting CD or TAPE, make sure a CD or tape is loaded in the CD tray or tape deck 2. 3 Press à or á on the system to set the hour for the timer to start. 4 Press í or ë on the system to set the minute for the timer to start. 5 Press CLOCK/TIMER to store the start time. � The timer is now set. � The TIMER remains on the display. � At the preset time, the timer will be activated. � The selected source will be played. Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, TUNER will be selected instead. � If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead. � The timer will not activate if a recording is in progress. To switch off the TIMER � Press TIMER ON/OFF on the remote control. � The timer is now switched off. � The display will show "CANCEL" and the TIMER disappears. To start the TIMER again (for the same preset time and source) � Press TIMER ON/OFF on the remote control. � The timer is now on. � The TIMER appears on the display.

SLEEP TIMER
Sleep (only on remote control)
This feature allows you to select a length of time after which the system will switch to the standby mode automatically. 1 Press SLEEP on the remote control repeatedly to select a period of time. � The selections are as follows (time in minutes): 60 � 45 � 30 � 15 � OFF � 60 � � "SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP button. � After this amount of time passes, the system will switch to the standby mode. To switch off the Sleep Timer � Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.

Timer Setting
� The system can switch on to CD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up. � Before setting the timer, make sure the clock is set correctly. � The timer will always be switched on once it is set. � The volume of the timer will increase from the minimum level until the volume level before the set is switched to standby mode.

pg 01-28/C80/37-Eng

24

2/16/00, 9:06 AM

3139 116 19662 (ENG)