PHILIPS FW-C788/21
Manual de Usuario

CD Operation
Disc Playback
a disc is loaded in the disc tray the current selected disc tray is empty the current selected disc tray is loaded or playing

1 2

Replace discs during playback Press DISC CHANGE. To change the inner disc, press DISC CHANGE again. � "DISC CHANGE" will be displayed and the disc will stop playing. � The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible.

E n g l i s h
16

To play all discs on the disc tray G Press PLAY� . � All the available discs will play once, then stop. � During playback, the selected disc tray, track number and elapsed playing time of the current track will appear on the display. To play one disc only G Press the DISC DIRECT PLAY button : DISC 1, DISC 2 or DISC 3. � The selected disc will play once, then stop. To interrupt playback G Press PAUSE� . G To resume playback, press PLAY�again. To stop playback G Press �. To search for a particular passage during playback G Press and hold à or á and release it when the desired passage is located. � During searching, the volume will be reduced. To select a desired track G Press í or ë repeatedly until the desired track appears on the display. G If playback is stopped, press PLAY�to start playback. Note: � In Shuffle mode, pressingí will cause the player to skip only to the beginning of the current track. To skip to the beginning of the current track during playback G Press í once.

Programming the disc tracks

Programming tracks is possible when playback is stopped. Up to 40 tracks can be stored in the memory in any order. Load the desired discs on the disc tray (refer to �Loading Discs�). 2 Press PROG to start programming. � PROG will start flashing. 3 Press CD (CD 1�2�3) or DISC 1/2/3 button to select a disc. 4 Press í or ë repeatedly to select the desired track. 5 Press PROG to store the track. ¶ Repeat steps 3�5 to store other discs and tracks. 6 Press PLAY�to start programme playback. � "PLAY PROGRAM" will be displayed. G To end programming without starting playback, press � once. � The total number of tracks programmed and the total playing time will appear on the display. Notes: � If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" will appear on the display instead of the total playing time. � If you attempt to programme more than 40 tracks, "PROGRAM FULL" will be displayed. � If you press any of the DISC DIRECT PLAY buttons, the system will play the selected disc or track, and the stored programme will be ignored temporarily.The PROG symbol also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. � During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically.

1

pg 001-027/C788/21-Eng

16

12/11/01, 5:29 PM 3139

115 21171