Tape Operation / Recording
Preparation for recording 1 2
Load a recordable tape into tape deck 1 with full spool to the left. Prepare the source to be recorded. CD 1/2/3 � load the disc(s). TUNER � tune to the desired radio station. TAPE � load the prerecorded tape into tape deck 2 with the full spool to the left. AUX � connect external equipment. When recording is in progress � REC starts flashing. q It is not possible to listen to another source. q It is not possible to activate the timer function during recording or tape dubbing.
CD Synchronised start recording
Press CD 1/2/3 to select the disc. q You can programme the tracks in the order you want them to be recorded (refer to �CD Operation - Programming the disc tracks�).
E n g l i s h
1
2
Press q on tape deck 1 to start recording. � The disc will start playback automatically. To stop recording
q Press 70 on tape deck 1, then press � to stop disc playback. Note: � During CD synchronised start recording, do not fast forward/rewind the tape in tape deck 2.
One touch recording / Recording the mixed sound (not available for all
versions)
Dubbing tapes 1
Load the prerecorded tape in tape deck 2. q Make sure both tapes have their full spool to the left.
1
Press CD 1/2/3 , TUNER or AUX to select the source.
q You can connect a microphone to record the mixed sound (refer to �Karaoke - Microphone Mixing�).
2 3
Press � on tape deck 1 and followed by q. Press�on tape deck 2. � Recording will start automatically. tape only. To continue recording on the reverse side, at the end of side A, flip the tape to side B and repeat the procedure.
q Dubbing of tapes is possible on one side of the
2 3
Start playback of the selected source. Press q on tape deck 1 to start recording.
To stop recording q Press 70 on tape deck 1.
To stop dubbing q Press 70 on tape deck 1 and 2. Notes: � Dubbing of tapes is possible only from tape deck 2 to tape deck 1. � To ensure good dubbing, use tapes of the same length.
22
pg 001-028_255_21-Eng 22 12/24/01, 10:57 AM 3139