Servicing Hints
Replacement of CD Drive See also exploded view of changer mechanism. 1. Dismantle printed circuit board: remove 5 screws. 2. Disconnect flexfoil cable and JST connector. Pay attention to WARNING! 3. Loosen 2 screws (pos 107,108) and remove CD drivelockings (pos 105,106). 4. Turn gearwheel (pos 42) of disc change mechanism by finger to move CD drive support in upper position as shown in picture below A. 5. Dismantle CD drive support (pos 95) B. 6. Replace CD drive (pos 100). The wire tree of JST connector has to be desoldered and resoldered on the new CD drive again.
B
A
Mounting of Carousel 1. Turn gearwheel (pos 42) of disc change mechanism by finger until CD drive is in play position. 2. Mount carousel (pos 115) so that disc is positioned right on turntable. Carousel position number doesn´t matter.
