Tape Operation / Recording
CD Synchronised start recording 1
Press CD 1/2/3 to select the disc. G You can programme the tracks in the order you want them to be recorded (refer to �CD Operation - Programming the disc tracks�).
E n g l i s h
2
Press G on tape deck 1 to start recording. � The disc will start playback automatically.
To stop recording G Press 70 on tape deck 1, then press � to stop disc playback. Note: � During CD synchronised start recording, do not fast forward/rewind the tape in tape deck 2.
Dubbing tapes 1
Load the prerecorded tape in tape deck 2. G Make sure both tapes have their full spool to the left.
2 3
Press � on tape deck 1 and followed by G. Press�on tape deck 2. � Recording will start automatically.
G Dubbing of tapes is possible on one side of the tape only. To continue recording on the reverse side, at the end of side A, flip the tape to side B and repeat the procedure. To stop dubbing G Press 70 on tape deck 1 and 2. Notes: � Dubbing of tapes is possible only from tape deck 2 to tape deck 1. � To ensure good dubbing, use tapes of the same length.
