PHILIPS FW765P/22
Manual de Usuario

CLOCK
English
REPEAT SHUFFLE PROGRAM STEREO

TIMER
DBB
IS PHANTOM 3 STEREO LW HSD REC AM
MAX

Notes: � During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. � When power interruption occurs, the clock setting is erased. � To set the time with RDS clock, see �RECEIVING RDS RADIO STATION� under TUNER section.
N

3 Press à or á to set the hour for the timer to start. 4 Pressí or ë to set the minute for the timer to start. 5 Press CLOCK�TIMER again to store the start time and the selected source. � The TIMER is now set. � The TIMER flag remains on the display. � To exit without storing the setting, press STOP�. � At the preset time, the TIMER will be activated. � The selected source will be played. � The TIMER flag disappears from the display.

NEWS

FM

MW

TIMER PM

FW 530C
CLOCK � TIMER

MINI HIFI SYSTEM
BAND TAPE 1 � 2 VIDEO

CD1 � 2 � 3

CD
v v

TUNER

TAPE

AUX

RECORD
E

SEARCH

STOP

PLAY

PAUSE

PREV

NEXT

Timer Setting
TUNING

CLEAR

SIDE A � B

View Clock
You can view the clock (if it is set) at standby or any source mode. It will be displayed for about 7 seconds. � Press CLOCK�TIMER briefly. � �10:25� (the current time) will be displayed. � �--:--� will be displayed if the clock is not set.

Clock setting
The clock is set in 24-hour mode, e.g. 00:00 or 23:59 . Before setting the clock, you must be in the View Clock mode. 1 Press CLOCK�TIMER to select clock mode. � �00:00� or the current time starts flashing. � �à , á , í , ë, �� light up. 2 Set the hour with à or á. 3 Set the minute with í orë. 4 Press CLOCK�TIMER again to store the setting. � The clock starts running. � To exit without storing the setting, press STOP�.
24

pg 001-27/FW775-765P/22-Eng

24

v

v v

PRESET v

� The system can switch on to CD, TUNER or TAPE 1 mode automatically at a preset time. It can serve as an alarm to wake you up. After half an hour from the preset time, the system will return to the standby mode if no button is pressed. � Before setting the timer, make sure the clock is set correctly. � The timer has to be reset or started again for each subsequent preset time. � The volume of the timer will be at the last setting before the system is switched to standby mode. 1 Press and hold CLOCK�TIMER for more than 2 seconds to select timer mode. � �ON 00:00� or the last set timer starts flashing. The TIMER flag will be displayed. � The last selected source is lighted while other available sources are flashing. � �à , á , í , ë, �� light up. 2 Press CD, TUNER or TAPE to select the desired source. � Before selecting CD or TAPE mode, make sure that a CD or tape is loaded respectively in the CD tray or tape deck 1.

Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is CD, playback will begin with the first track of the last selected disc. If the CD trays are empty, the TUNER will be selected instead. � If the source selected is TAPE 1, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead.
To cancel the TIMER 1 Press CLOCK�TIMER for more than 2 seconds. 2 Press PAUSE � to cancel the timer. � �CANCEL� will be displayed. � The TIMER flag disappears from the display. To start the TIMER again (for the same time) 1 Press CLOCK�TIMER for more than 2 seconds. 2 Press CLOCK�TIMER again to store the start time and the selected source.

9/1/99, 9:38 AM

3139 116 17601