TUNER
� The system will search for every available station in the FM waveband first, then search by the AM waveband. � All available radio stations will be stored automatically. The frequency and preset number will be displayed briefly. � The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. � The system will remain tuned to the last stored preset radio station. Manual programming 1 Press TUNER (FM�AM). 2 Press TUNER (FM�AM) again to select 3 the desired waveband : FM or AM. Press PROGRAM for less than one second. � The PROGRAM flag starts flashing. � The next available preset number will be displayed for selection. Press TUNING à or á to tune to the desired frequency. If you wish to store the radio station to another preset number, press PRESET 4 or 3 to select the desired preset number. Press PROGRAM again. � The PROGRAM flag disappears and the radio station will be stored.
Stations
� Press PRESET 4 or 3 to select the desired preset number. � The preset number, radio frequency, and waveband appear on the display.
4 �
Notes: � You can cancel the automatic programming by pressing PROGRAM or STOP�CLEAR � (on the system only). � If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming: only the preset numbers 10 to 40 will be programmed.
5
� Repeat the steps 3 to 5 to store other preset radio stations.
Notes: � When 40 radio stations are stored and you attempt to store another radio station, the display will show "FULL�. If you want to change an existing preset number, repeat steps 3 � 5.. � You can cancel manual programming by pressing STOP�CLEAR � (on the system only). � During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.
19
