No hay comentarios de productos.
FU-40SE-K
INSTALLATION
WHEN USING THE UNIT ON A TABLETOP FIXING THE STAND 1. Remove the front panel. At this time, also remove the pre-filter, staminapower carbon and the HEPA filter. WHEN WALL MOUNTING CAUTION When mounting the air purifier on a wall, the wall will become dirty as time passes. To prevent this, place a vinyl sheet, etc., around the unit. Ensure that the wall is suitable for mounting the air purifier. Do not install in a location with heavy smoke, such as in a kitchen, etc. The unit surface may crack as a result. 1. Determine the mounting location Leave space around the bracket by referring to the illustration below. The unit cannot be mounted if there is insufficient spacing around the bracket.
Front panel 2
1
1
2. Place the unit with its front side facing down on a flat and stable surface. Place a soft cloth, etc., to prevent damaging the unit.
75cm or more
69cm or more from the ceiling Size of main unit
75cm or more
75cm or more
Mounting bracket 1 60cm or more from 60cm or more sidewall from sidewall
3. Insert the tabs on the stand into the holes on the main unit and fix the stand using the supplied thumbscrews (2 units). CAUTION Mount on a flat surfaces Do not mount the unit to a thin wall wiyh little strength such as a plasterboard, etc.The unit may fall and can be very dangerous.
Tabs
Holes
Thumbscrews
2. Mount mounting bracket 2 to the main unit Mount the bracket to the back of the main unit using the included small screws (2 units).
Mounting bracket 2
Small screws (2 units)
6
|