Listening to the Radio
To select the band (FM or AM)
FM AM
To preset the stations
Remote ONLY
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset. 2 Activate the preset number entry mode.
SET
REC
To tune in to a station
While FM or AM is selected... Remote control: 1 sec.
DOWN
Main unit: 1 sec.
UP
3
� Finish the following process while the indication on the display is flashing. Select a preset number for the station you store.
1 4 2 5 8 10 3 6 9
7
Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing. � When you repeatedly press the button, the frequency changes step by step. To stop searching manually, press either button. If the received FM station is hard to listen
FM MODE/ MP3
Remote ONLY
10
Examples: To select preset number 5, press 5. To select preset number 15, press +10, then 5. To select preset number 30, press +10, +10, then 10.
� You can also use the PRESET UP/PRESET DOWN buttons.
4 Store the station.
SET
REC
The MONO indicator lights on the display. Reception will improve though stereo effect is lost�Monaural reception mode. To restore the stereo effect, press the button again (the MONO indicator goes off).
