ONKYO FRN3X
Manual de Usuario

Dubbing CD to MD (CD dubbing)
� This operation is one-touch recording that enables the DLA LINK. � The tracks are automatically numbered.

22 1

13

3

1 2

Insert a CD and MD.
See Step 1 of �Playing a CD� on page 20. See Step 1 of �Playing an MD� on page 22. Use a recordable MD.

Check the necessary recording time.
1 Press CD/MD repeatedly to select �CD.� 2 Check the CD�s total playback time. If the display does not indicate the total playback time, press DISPLAY repeatedly.

Total playback time

3 Press CD/MD to select �MD.� 4 Check the available recording time on the MD. If the display does not indicate the available recording time, press DISPLAY repeatedly.
Available recording time (DISC REMAIN lights up.)

Canceling the dubbing operation
When playback of a CD is complete, or an MD is recorded up to the end, recording automatically stops. To cancel the operation during recording, press MD or CD .

If some data has already been recorded in the MD, the additional songs will be recorded and numbered sequentially following the existing data in the MD.

Note
DLA LINK may take up to 90 seconds.

3

Press CD DUBBING to start dubbing.

Tip!
� Recorded songs are automatically numbered during CD-toMD dubbing. �X2 Dubbing?� appears for �CD-MD Dubbing� scrolls � CD-R or LINE input source is three seconds. on the display. audible during CD dubbing. The FR-N3X searches for the peak level in the CD and sets (The level meter in the display the optimum recording level. (DLA LINK) indicates the level of the recording source. The FR-N3X Then, it starts recording. DIGITAL OUT connector outWhen CD playback is completed or the recording reaches puts the CD audio.)

the end of the MD, the recording stops. Checking the recording result

Notes on CD dubbing

� You cannot change the input After recording is complete or you press to stop recording, press source. MD / on the FR-N3X or on the remote controller. Playback The / (play/pause) and starts from the top of the recording. (eject) are disabled.

27