â� Changing the Depth of Effect
You can select from ten levels of depth for the effect.
1.
Hold down the [Effects] button and press the [-] or [+] button.
The depth for the effect being applied to the currently selected tone appears in the display.
fig.01-20
NOTE
You cannot change the levels of depth for the rotary effect.
The next time you choose the same tone, the effect with the depth you�ve selected here is applied.
â� Adding a Spinning Sound to Organ Tones (Rotary Effect)
The Rotary effect is applied to some Organ tones you can select with the [Organ] button, and to the tone of the [Tone Wheel] button. When one of these tones is selected, you can use the [Effects] button to change the speed of the rotary effect. What the rotary effect does is to add a �spinning� effect similar to the sound of an organ using a rotating speaker.
To prevent the Rotary effect from being applied, select an effect type other than the Rotary effect and then remove the effect.
1. 2.
Press the [Organ] button and select the organ tone.
When a tone that has the Rotary effect added is selected, the [Effects] button�s indicator flashes or blinks in green.
Each time pressing the [Effects] button, switch the speed of the rotary effect between rapid and slow rotation.
When the [Effects] button�s indicator flashes in green, a more rapid rotary effect is applied. When the [Effects] button�s indicator blinks in green, a slower rotary effect is applied.