GB
For refitting the upper door holder take out the screws (2 pieces) fixing the plastic top on the back of the box. Push back the top and lift it from the fixing elements. Unscrew the screws fixing the upper door holder (2 pieces). After unscrewing turn over the pin in the door holder plate in the direction of the arrow. Fit and fix the door holder plate on the other side without displacing the door. Put back the plastic top on the fixing elements and pull it forward. Fix the top with the screws (2 pieces) on the back side of the box. Before refitting the handle drill the plastic nails on the other side of the door, then refit the handle and the plastic nails taken out of the bag on the opposite side. Put the appliance to its place, set it level and plug it into the mains socket. In case you do not want to perform the procedures above, call the nearest brand-mark service. Technicians will accomplish the refitting expertly for charge.
