6. Start
Before pulling the On/off knob check if: s The door is properly closed.
s s s s
The appliance is plugged in. The water supply tap is turned on. The drain filter is tight. The drain hose is adequately positioned.
2
Pull the program dial up to you till it klicks. The pilot light comes on and the program will begin.
2
7. Stop
P0215
ALO26
The washing machine stops automatically once the cycle is finished, the pilot goes out. Open the door 2 to 3 minutes after the end of the program to give the safety device time to unlock. Push the knob close the tap and unplug the appliance. Leave the door ajar for a few minutes for the steam to get out.
IMPORTANT REMARK: This appliance is provided with a security device to avoid opening during the cycles. Open it only when absolutely necessary and wait 2 to 3 minutes after you have stopped the machine to give the safety device time to unlock.
