6. Start
Before pulling the program selector check if: s The door is properly closed.
s s s s
The appliance is plugged in. The water supply tap is turned on. The drain filter is tight. The drain hose is adequately positioned.
2
Pull the program dial towards you till it clicks. The on/off lamp light comes on and the program will begin.
2
7. Stop
P0215
ALO26
The washing machine stops automatically once the cycle is finished, the on/off lamp goes off. Open the door 3 minutes after the end of the program to give the safety device time to unlock. Push the program selector in, close the tap, and unplug the appliance. Leave the door ajar for a few minutes for the steam to get out.
IMPORTANT REMARK: This appliance is provided with a security device to avoid opening during the cycles. Open it only when absolutely necessary and wait 3 minutes after you have stopped the machine to give the safety device time to unlock.
