ZANUSSI FLD884VM
Manual de Usuario

4. Select the temperature

Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.

Turn the dial to the required setting.

90°

1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

P0450

5. Select the required options and the spin speed.

P0178

P0004

2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash, pour detergent into the appropriate compartment marked .

6. Select the programme and start the machine
Turn the programme selector dial clockwise to the required programme and depress the START/STOP button: the operating pilot light comes on and the machine starts to operate.

3. Measure out the additives
If required, pour fabric softener into the compartment marked , and bleach into the compartment marked without exceeding the «MAX» mark.
P0465

B

P0414

P0444

P0445

36