ZANUSSI FL1089ALU
Manual de Usuario

whereas in the programme for delicate fabrics the water is only drained. � SOAK (REMOJO): select this option if you wish to perform a soak of about 30 minutes at 30°C to your laundry. By pressing the DELAY START (INICIO DIFERIDO) button the soak time can be prolonged up to 24 hours max. After this time the wash cycle will automatically start. This function is not available for wool and handwash cycle. The soak ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained. � The same button allows you to select the QUICK function (FUNCION EXPRESS), for laundry that is only slightly soiled (not for wool and HAND WASH programme). The washing time will be reduced according to the type of fabric and the selected temperature. The PREWASH, SOAK and QUICK options cannot be selected together. � SUPER RINSE (ACLARADO ADICIONAL): this option can be selected with all programmes except the wool and hand wash programme. The machine performs 4 rinses instead of 3. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. � ECONOMY 40°AA: this option can be selected for cottons and synthetics lightly or normally soiled with a temperature of 40°C or higher. If you select 40°C , the machine will prolong the time at 40°C in the washing phase, this will allow an A class in energy efficiency and washing performance to be achieved. If you select 90°C and press the ECONOMY 40°AA button, the washing temperature will be reduced from 90°C to 60°C. If you select 60°C and press the ECONOMY 40°AA button, the washing temperature will be reduced to 40°C. In both cases the washing time will be prolonged. The SUPER RINSE and the ECONOMY 40°AA options can be selected together by means of the relevant button.

As all spinning phases are suppressed, this washing cycle is very quiet and it can be useful at night or in times with a more economical power rate. On cotton and synthetic programmes the rinses will be performed with more water. At the end of the cycle, the light corresponding to NIGHT WASH option is on and the START/PAUSE button light will flash, to indicate that the water must be drained. A static zero appears on the display. To complete the cycle, choose one of the following options: � Draining and spin: - Press the START/PAUSE button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme. - Select spin speed by means of button 5, and press the START/PAUSE button. � Drain only - Press the RESET (ANULAR) button once, so as to cause the DRAIN light to light up, then press the START/PAUSE button. Important! If you accidentally press the RESET (ANULAR) button more than once, the display will show three blinking dashes. To cause the washing machine to drain the water, select any washing programme by means of the FABRIC (TEJIDOS) button, then press RESET (ANULAR) three times in order to select the DRAIN position (only the DRAIN light will remain lit).

9 Display
The following pieces of information are shown on the display: � Three blinking dashes, when a programme is cancelled by means of the RESET (ANULAR) button. The three blinking dashes will also appear when you press the ON/OFF button to switch the machine on, if the previously selected cycle has been erased.

---

8 NIGHT WASH button (CICLO NOCHE)
When you choose this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. 35

ENGLISH