PIONEER FH-P6200/XN/ES
Manual de Servicio

1

2

3

4

A

- Removing the Grille Assy (Fig.2-1,2-2) Use a pair of tweezers or something like that. Insert the tips into the bottom panel holes and slide the rail in the direction indicated by an arrow in Fig.2-1 until the grille moves down to the bottom. (Fig.2-1)

Panel Assy Grille Assy
4

1

Remove the two screws.

Disconnect the connector and then remove the Grille Assy.
B

Holes

- Removing the Panel Assy (Fig.2-2)

2 3 4
C

Remove the two screws.

3

Remove the two screws.

Release the two latches and then remove the Panel Assy.

Fig.2-1

1

2

*) When installing the Grille Assy, please make sure that the Spring is also installed. - Removing the Chassis Unit (Fig.3)

Spring
Fig.2-2

Cover

1 2
D

Remove the two screws.

Remove the four screws and then remove the Heat Sink. Remove the four screws and then remove the Chassis Unit.

3 3

4

4

Heat Sink
2 2 1 4 1
E

2 2

4

4

Chassis Unit
- Removing the Cover (Fig.3)
F

Fig.3

3
62 1

Remove the two screws and then remove the Cover.
FH-P6200/XN/ES

2

3

4