PIONEER FH-P4000/XN/UC
Manual de Servicio

FH-P4000,P4000R

7.1.2 DISASSEMBLY
- Removing the Case (not shown) 1. Remove the Case.

- Removing the Panel Assy (Fig.1)

CD Mechanism Module

Remove the three screws and then remove the Panel Assy. C - Removing the CD Mechanism Module (Fig.1) Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module. D Note : Remove or tighten the screw A with supporting the Chassis Unit by your hand from underneath. Tighten the screws by turns started from A.

B

A

Fig.1

Panel Assy

- Removing the Chassis Unit (Fig.2) Remove the two screws. Remove the two screws and then remove the Chassis Unit.

Chassis Unit

Fig.2

76