Inicio >>
PIONEER >>
FH-P4000R/XN/EW Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
FH-P4000,P4000R
7.1.2 DISASSEMBLY
- Removing the Case (not shown) 1. Remove the Case.
- Removing the Panel Assy (Fig.1)
CD Mechanism Module
Remove the three screws and then remove the Panel Assy. C - Removing the CD Mechanism Module (Fig.1) Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module. D Note : Remove or tighten the screw A with supporting the Chassis Unit by your hand from underneath. Tighten the screws by turns started from A.
B
A
Fig.1
Panel Assy
- Removing the Chassis Unit (Fig.2) Remove the two screws. Remove the two screws and then remove the Chassis Unit.
