CANON FAXL250
Manual de Usuario

Error Codes, Messages, and Solutions
This table lists the error messages that appear in the FAX-L250 LCD displayand the corresponding error codes that appear in activity reports, and tellswhat to do for each. Message AUTO REDIAL Error Code � Cause The receiving fax machine was busy and the FAX-L250 is waiting to redial. The telephone number you dialled is busy. The other party�s fax machine is not working properly. The other party is not using a G3 fax machine. The telephone line type setting on your FAX-L250 is incorrect. The receiving fax machine did not answer within 35 seconds. Action �

BUSY/NO SIGNAL

#005/018

Try sending the document again later. Contact the other party and have them check their fax machine. Contact the other party and have them send or receive the document using a G3 machine. Set your FAX-L250 for your telephone line (tone or pulse). Contact the other party and have them check their fax machine. You can also try to send the document manually. For an overseas call, add pauses to the registered number. If you want to cancel the transmission, press the ( STOP) button. Make a copy of a document. If the printout is light or blank, replace the toner cartridge. The documents received in memory will then be printed automatically. Replace the toner cartridge and have the other party send the fax again.

CALLING

�

The FAX-L250 is dialling the receiving fax machine. The toner cartridge is empty.

CHANGE CARTRIDGE �

The FAX-L250 image memory may be full because the toner cartridge ran out of toner.

10-30