7. Cancelling the �delay start�
It is possible to cancel a countdown in progress or before it starts, simply pressing the delay start button until the indicator lights corresponding to delay start hours (3h, 6h or 9h) turn off. In this case the selected washing programme will start automatically after a 3 seconds.
8. End of the washing programme
The dishwasher will automatically stop and the programme in progress indicator light turns off. The end of programme indicator light will illuminate. The indicator light of the programme just ended will remain on. The dishwasher�s drying system is provided with a device that allows air to circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets. Once the washing programme has ended this device operates intermittently for other 20 minutes, as long as the dishwasher is switched on. If the On/Off button is pressed or the door is opened during these 20 minutes, the device will be automatically cancelled. Switch off the dishwasher by pressing the On/Off button. Open the dishwasher�s door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.
9. Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler then the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
