MAINTENANCE
Prior to undertaking any maintenance operation, be sure to unplug the appliance from the wall socket as a safety precaution.
GB
Interior light (Fig. 11)
The light bulb inside the refrigerator compartment can be reached as follows: - unscrew the light cover securing screw, - unhook the moving part as shown in the �gure. Fig. 11
Periodical cleaning
Clean the interior periodically with lukewarm water and some sodium bicarbonate; clean the cabinet exterior with a silicone wax spray; clean the condenser and the motor compressor with a brush or a vacuum cleaner. This will improve the appliance operation, consequently reducing power consumption.
Idle periods
During periods when the appliance is not in use, take the following precautions: unplug the appliance from the power supply; remove all foodstuffs from the appliance; clean the interior and all accessories; leave the doors ajar to facilitate the circulation of air in the interior of the cabinet so as to prevent unpleasant odours from accumulating in the appliance.
D731
SERVICING
If the appliance is not functioning properly check that: the plug is �rmly in the wall socket and the mains power switch is on; there is no power failure; the control knob is in the right position. Furthermore:
GB
if the appliance seems too noisy check that the sides are not touching furniture that can transmit or amplify a noise or a vibration. Also, check that the refrigerant unit does not vibrate. If your appliance is still not working properly after making the above checks, contact your local dealer or the nearest service center. To obtain fast service, it is essential that when you apply for it you specify the model and serial number of your appliance which can be found on the warranty certi�cate or on the rating plate on the bottom left side of the appliance.
