EZ8 OPERATION GUIDE The Output Port Sources Panel
The Ouptut Port Source Panel is used to route the EZ8 audio inputs to its outputs for monitoring. Note that its flexible matrix-style architecture allows you to easily monitor inputs, outputs, or both.
Output Source Select Buttons When a channel�s Output button is checked, that channel�s output signal appears at the channel�s hardware output. Use this setting when playing back recorded signals from the computer.
13
Digital Mixer Ouput Selector When this button is checked, all signals routed through the Digital Mixer (both inputs and outputs) appear at Outputs 1 and 2. Use this setting for easy monitoring while recording and overdubbing.
Settings Controls Use these buttons to Save, Delete, and Load Output Port settings.
Input Selector Buttons When these buttons are checked, the input signal(s) is routed directly to the output(s). Use this function to set up multiple monitor mixes when recording.