Power supply
ECO-PLUS NiMH batteries (for versions supplied with ECO-PLUS NiMH batteries AY 3362 only) Recharging works only on a set with supplied rechargeable ECO-PLUS NiMH batteries AY 3362. 1 2
Recharging the ECO-PLUS NiMH batteries Insert the 2 rechargeable ECO-PLUS NiMH batteries AY 3362. Connect the mains adapter to 4.5V DC on the set and to the wall socket. � Charging batteries is scrolled once. While the battery symbol is changing, the set is recharging the NiMH batteries. When the batteries are fully recharged, is displayed. is shown and Charge full
q
Power supply/Headphones
Use only the AY 3170 mains adapter (4.5 V/300 mA direct current, positive pole to the centre pin). Any other product may damage the set. English
Mains adapter
English
1 2
Make sure the local voltage corresponds to the adapter´s voltage. Connect the mains adapter to 4.5V DC on the set and to the wall socket. Note: Always disconnect the adapter if you are not using it.
Headphones (SBC HE 545)
Connect the supplied headphones to LINE OUT/p. Note: LINE OUT/p can also be used for connecting this set to your HiFi system. Set VOL E on this set to position 8 and adjust volume and sound with your HiFi system. Use your head when using headphones Hearing safety Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing. Traf�c safety Do not use headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you.
3
ECO-PLUS NiMH battery information Recharge only the supplied NiMH batteries AY 3362. Do not recharge any other type of batteries. Recharging takes approximately 7 hours. Recharging stops during playback. Recharging full or half-full batteries will shorten the battery lifetime. Therefore, after using the rechargeable ECO-PLUS NiMH batteries a few times, discharge them completely before recharging. To avoid a short circuit, the batteries should not touch any metal objects. If the batteries quickly become empty after recharging, the contacts are dirty or the end of the battery lifetime has been reached.
