Operating sequence
Washing only
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4. Switch the machine on
To switch the machine on, press the ON/OFF button : the mains-on light comes on.
---
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door. If the programme selector dial is on the RESET O position, three flashing dashes will be displayed. If the programme selector dial is positioned on a wash programme, the duration of that programme will be displayed.
5. Select the desired programme
Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
° 0 ° 0
P0004
95° E° 60
G
F
D
4 0 °E
E
B A
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash or soak programme, pour detergent into the appropriate compartment marked .
° 0
30° ° 4 6
C 3 4
The display shows the duration of the programme.
6. Select the spin speed or option
Depress the spin speed button to choose the required speed or option : the corresponding light comes on.
1600 1200 900 700
3. Measure out the additives
If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.
