4. HOW TO DO A WASH?
Before the first wash in your washing machine, we recommend that you should do a preliminary wash at 90°C with detergent but without any washing to clean the tub.
4.4. Select the temperature
Keep pressing the "Temperature" button to increase or reduce the temperature if you want your washing washed at a different temperature from the one selected by the washing machine. Some programmes do not allow you to change the temperature (the "selection error" message will appear in the display window). The maximum temperature available message will appear on the second line of the display window (instead of "cycle end at"). The temperature selected will appear in the corner of the 3rd line of the display window.
4.1. Loading the washing
� � � Lift the machine cover. Open the drum by pressing on the locking button A; the two flaps automatically separate. Insert the washing, close the drum and the cover of your washing machine. Warning : before you close the cover of your washing machine, make sure that the drum door is properly closed: � the two flaps latched together, � the locking button A extended.
COTTONS Max. 60°C 95°C 1300
Options
13.45 16.07
A
Change
Exit
4.2. Proportioning of detergents
Your washing machine was designed to reduce water and detergent consumption, therefore reduce the doses recommended by detergent manufacturers. Pour the powder detergent dose into the wash compartment and into the prewash compartment if you chose the «prewash» option. Pour the softener into the compartment and Javel water into the compartment if you wish. If you are using a different type of detergent, refer to the «detergents and additives» section in the washing guide.
4.5. Select the spinning speed, the rinse hold or Silence cycle options
Press the button "Spinning " to change the spin speed if you want your washing to be spun at a different speed from the one selected by the washing machine. By pressing the spin speed button you can also choose the "0" no spin option, Rinse hold option and Silence cycle option . � The "0" no spin option : stops all spin phases and increases the number of rinses for the Cottons and Synthetics programmes. � Rinse hold option : the washing machine will not empty the last rinse water and so the washing will not crease. Silence cycle option : the washing machine will not empty the last rinse water and so the washing will not crease. As all the spin phases will be cut out the washing cycle will be less noisy and can be selected at night. Rinses on the Cotton and Synthetics programmes will use more water. The relevant message will appear on the second line of the display window. The spin speed selected will be indicated on the 3rd line above the "Spin " button. After a rinse hold or Night silence cycle you can choose one of the following programmes: �
4.3. Select the desired programme
Turn the programme selector to choose the desired programme. The appropriate message will appear in the display window. The display window will show the time the selected programme cycle will finish, with the calculation based on the maximum load for each type of material. The Start/ Pause button light will start to flash. If you have a small load to wash, at the start of the cycle the display window will still show the end of the cycle as if it were a maximum load. The duration display will be gradually adjusted while the cycle is running through.
COTTONS Cycle 60°C end 1300
Options
13.45
�
DRAIN : To drain the water, select the drain programme using the programme selector then press the Start/Pause button. SPIN : to spin the washing choose the spin or the
at :
16.07 �
Change
Exit
delicate spin programmes with the programmes selector : select the spinning speed using the «spin » button and then press the START/PAUSE button.
