1 Detergent dispenser drawer 2 �DELAY START� button
This button makes it possible to delay the starting of the washing programme by 6 and 3 hours. The delay you have selected is indicated by the coming on of the corresponding light. You must select this option after you have set the programme and before you press the START PAUSE button . You can cancel the delay time at any moment, before you press the START/PAUSE button.
If you have already pressed the START/PAUSE button, and you wish to cancel the delay time, proceed as follows: � set the washing machine to PAUSE by pressing the START/PAUSE button; � press the DELAY button once, the light relevant to the selected delay goes off . � press the START/PAUSE button again to start the programme. Important!
�
3 �QUICK WASH� button
This button allows you to select the Quick Wash function, for laundry that is only slightly soiled (not for wool, hand wash and economy programme 60E). The washing time will be reduced according to the type of fabric and the selected temperature. Max. load for cotton 3 kg.
4 �SUPER RINSE� button
The Super Rinse option can be selected with all programmes except the wool and hand wash programmes. The machine will perform 2 additional rinses. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
5 �START/PAUSE� button
After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing and remains lit. To interrupt a programme which is running, depress the Start/Pause button: the corresponding pilot light starts to flash. To restart the programme from the point at which it was interrupted, press the START/PAUSE button again.
To modify the DELAY START: first you have to cancel the previously selected programme by turning the programme selector dial to �0�. Select again the desired programme and set the new DELAY START. The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing the START/PAUSE button. After you have closed the door, press the START/PAUSE button again.
�
The delay start cannot be selected with programmes (drain) and (spin). 8