No hay comentarios de productos.
¡If a tape ends during TIMER RECORDING, the
2) Set the frequency of the recording
For once: Press K or L to point to "ONCE". For daily (Monday~Friday): Press K or L to point to "DAILY". For weekly: Press K or L to point to "WEEKLY". Then, press B.
3) Set the date
PROGRAM NUMBER 4 ONCE DAILY WEEKLY
First, press K or L for the month. Then, press B. Next, press K or L for the day. Then, press B.
4) Set the start time
ONE TIME PROGRAM PROGRAM NUMBER 4 DATE --/-START TIME - - : - - - END TIME - - : - - - CHANNEL -REC SPEED - -
First, press K or L for the hour. Then, press B. Next, press K or L
ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /12 MON START TIME - - : - - - END TIME - - : - - - CHANNEL -REC SPEED - -
VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light blinks. (If the DVD power is off, the VCR will become STANDBY status). ¡If a tape is not in the VCR or does not have a safety tab, the TIMER light flashes and timer recording will not operate. Please insert a recordable tape. ¡When all timer recordings are finished, the TIMER light will flash. To use the VCR again as usual, press T-SET to disable the flashing TIMER light, then press VCR/TV to select the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual. ¡When timer recordings are set, the TIMER light will come on. To use the VCR as usual until the time for the recording, press T-SET so that TIMER light disappears. Press VCR/TV to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.
for the minute. Then, press B. And then, press K or L for AM or PM. Then, press B.
5) Set the end time
ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /12 MON START TIME 07: 30 PM END TIME - - : - - - CHANNEL -REC SPEED - -
If you want to use the DVD player during a VCR timer recording or while the TIMER light is on or flashes.
¡You can use the DVD player while the TIMER light
Follow the instructions of "Set the start time" to set the end time.
6) Set the channel number
ONE TIME PROGRAM
Press K or L repeatedly for the desired channel number. Then, press B.
PROGRAM NUMBER 4 DATE 05 /12 MON START TIME 07: 30 PM END TIME 08: 30 PM CHANNEL -REC SPEED - -
is on or flashes, or during a timer recording. Press POWER to turn on the DVD. Press DVD on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don�t have to set the TIMER off to use the DVD only.
If you connected the DVD/VCR COMBINATION UNIT to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 13, select the DVD/VCR to channel 3 or 4 the same channel as RF output channel of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box. Leave the cable box or satellite box on for timer recording.
TO STOP AN AUTOMATIC TIMER PROGRAM ALREADY STARTED
Press STOP/EJECT on the DVD /VCR COMBINATION UNIT.
TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM 1 Press T-SET.
¡If the DVD output mode is selected, you have to
7) Set the tape speed
ONE TIME PROGRAM
Press K or L repeatedly for the desired tape speed. Then, press B.
PROGRAM NUMBER 4 DATE 05 /12 MON START TIME 07: 30 PM END TIME 08: 30 PM CHANNEL 16 REC SPEED SP SP SLP
switch it to the VCR mode by pressing the VCR on the remote control or the OUTPUT on the VCR.
2 Select main menu by pressing MENU. 5 To set another program, repeat step [4]. To
exit, press CLEAR/C.RESET.
3 Select "TIMER PROGRAMMING" by pressing K or L. Then, press B.
6 Press T-SET to set the timer. ¡The TIMER light on the DVD/VCR COMBINATION UNIT comes on. TIMER RECORDING WILL NOT BE ACTIVATED UNLESS YOU PRESS T-SET.
4 Select the program number you want to
check by pressing K or L. ¡The details of the selected program appears on the
HINTS FOR TIMER RECORDING
VCR
¡If there is a power failure or the VCR is unplugged
TV screen. ¡Go to the digit you want to change by pressing B or s. Then, enter correct numbers by pressing o or p. may cancel the entire program by pressing s ¡You while the program number flashes.
5 Press CLEAR/C.RESET to exit. 6 Press T-SET to return to timer stand-by mode.
1L25
for more than 30 seconds, the clock setting and all timer settings will be lost. � 20 �
EN
