FUNAI EWC1901
Manual de Servicio

PLAYBACK
This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not us poor quality or damaged tapes. INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.
Window

AUTO REPEAT PLAYBACK
The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part, which is blank for more than 10 seconds.

CORRECT

WRONG

PRECAUTIONS

1

Select �USER�S SET UP�

�MENU� TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER�S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH

� Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to �USER�S SET UP�. Then, press the F.FWD/B button.

� Avoid extreme heat, high humidity and magnetic � �
fields. Do not tamper with the cassette mechanism. Do not touch the tape with your fingers.

2

Select �ALL� or �BLANK�
� USER�S SET UP �

NORMAL PLAYBACK
Make sure ... � TV/VCR power must be turned on.

Press the PLAY/K or STOP/L button to point to �REPEAT PLAY�. Press the F.FWD/B or REW/s button repeatedly until your desired selection [ALL] or [BLANK] appears.

RENTAL B REPEAT PLAY AUTO RETURN

[OFF] [ALL] [OFF]

1

Insert a prerecorded tape

3

Exit the Repeat Play setting

If the erase-protection tab has been removed, the TV/VCR will start playback automatically.

Press the MENU button on the remote control to return to the TV mode.

2

To begin playback

PLAY

B

4

Start playback

Press the PLAY button. Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU button to clear the menu. then, press the PLAY button. If a tape is already on the TV/VCR with power off, A) Press the PLAY button on the TV/VCR. Power will automatically turn on and playback will start. (Direct button operation) B) Use the remote control; Press the POWER button to turn the TV/VCR on, and then press the PLAY button on the remote control.

Press the PLAY button to start the Repeat Play. �REPEAT PLAY B� appears. � Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR. � If the Rental mode is set [ON], the �RENTAL PLAY B� display has priority.

TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature.

3

To stop playback

STOP

Press the STOP button when playback is completed.

- 17 -

EN
9I03