You can change certain aspects of the DVD display screens and on-screen messages on the TV screen. Follow steps 1 to 2 in the �CUSTOM MENU� section on page 26.
Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD Follow steps 1 to 2 in the �CUSTOM MENU� section on page 26.
3 Press [K / L] to select the below items then
hit [ENTER].
3 Press [K / L] to select the below items then
hit [ENTER].
TV MODE: QUICK ¡Press [K / L] for an item selection, then hit [ENTER]. ¡Select �4:3 LETTER BOX� for black bars to appear on top and bottom of the screen. ¡Select �4:3 PAN & SCAN� for a full height picture with both sides trimmed. ¡The default setting is �4:3 LETTER BOX�.
TV MODE STILL MODE 4:3 LETTERBOX AUTO ON ON ANGLE ICON AUTO POWER OFF
SETUP
DISPLAY
DRC (Dynamic Range Control): ¡To compress the range of soft to loud sound. ¡The default setting is �ON�. DOWN SAMPLING:
SETUP DRC
AUDIO ON ON ON
DOWN SAMPLING DOLBY DIGITAL
¡ON : Output in 48 kHz. (default) ¡OFF : Output the original SETUP
AUDIO ON ON ON
STILL MODE:
¡Press [K / L] for an item
SETUP
DISPLAY 4:3 LETTERBOX AUTO ON ON
selection, then hit [ENTER].
TV MODE STILL MODE ANGLE ICON AUTO POWER OFF
sound. When playing disc with copyright Protection ¡If you select �OFF�, copyright protection will be activated and sound will be down sampled at 48kHz. DOLBY DIGITAL: QUICK Set to �ON� when the unit is connected to a Dolby Digital Decoder.
SETUP AUDIO ON ON ON
DRC DOWN SAMPLING DOLBY DIGITAL
¡Select �AUTO� normally. ¡If you select �FIELD�, the picture in the still mode ¡If you select �FRAME�, the picture in the still
will be stabilized.
mode will be highly defined. ANGLE ICON: ¡Hit [ENTER] repeatedly to turn Angle icon �ON� or �OFF�. ¡The default setting is �ON�. AUTO POWER OFF: ¡Hit [ENTER] repeatedly to turn Auto Power off �ON� or �OFF�. ¡The default setting is �ON� and the screen saver program starts when there is no input from the unit for 5 minutes in the stop mode. After the screen saver program is activated for 15 minutes, the power is automatically turned off.
DRC DOWN SAMPLING DOLBY DIGITAL
¡ON : Output a Dolby Digital signal
(default) ¡OFF : Convert the Dolby Digital to PCM (2 channel stereo)
4 Hit [SETUP] to exit the menu.
4 Hit [SETUP] to exit the menu.
TV SETUP MENU IN DVD MODE
¡Language setting for on-screen menus is only available in TV SETUP menu. You can access it by hitting
[SETUP] in DVD mode (Refer to �MENU LANGUAGE� on page 17.
¡�CHANNEL SETUP� menu is not operative in DVD mode although it is displayed on the screen.
Press [SELECT] to move to TV mode first, then follow steps in �CHANNEL RESETTING� on page 16.