EMERSON EWC0901
Manual de Usuario

Make sure ... � TV/VCR power must be turned on. � Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel.

NORMAL RECORDING
You can ONLY watch the same TV program that is being recorded.

OTR (One Touch Recording)
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure ... � TV/VCR power must be turned on. � Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: � This function CANNOT be done from the remote control.

1

Select the channel to be recorded

Press the number buttons on the CH 10 remote control or the CHANNEL K or L button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.

2

Select the tape speed

� Recording starts immediately when the REC/OTR � �
SP

Press the SPEED button to select the desired tape speed (SP/ SLP).

�
3
Begin recording
REC

Press the RECORD button.

SP

� � �

4

Stop recording

Press the STOP button when recording is completed.

button is pressed. When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode. To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control. To show the remaining time, press the DISPLAY button on the remote control so that �OTR� appears on the TV screen. (It will show up momentarily then disappear.) Recording stops when 0:00 is reached. Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120). If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, ejects the tape and turns itself off.

SKIPPING UNWANTED SCENES DURING RECORDING
Press the PAUSE/STILL button to temporarily stop recording. Press the PAUSE/STILL or RECORD button to resume recording. NOTES: � After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape damage.
SP PAUSE

1

Select the channel to be recorded

Press the number buttons on the remote control or the CHANNEL K or L button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

2

Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

- 19 -

EN
9J27