To mount two transmitters into a rack: Place the two transmitters side by side onto a flat surface, their bottom sides facing upwards. Align the connecting plate over the holes in the bottom sides of the transmitters. Secure the connecting plate using eight of the supplied recessed head screws (M 3x6). Hook the two rack mount �ears� of the transmitters. to the front panels
Secure the rack mount �ears� to the transmitters using two of the supplied recessed head screws (M 3x6) respectively. Slide the transmitters into the 19� rack. Secure the rack mount �ears� to the rack. When mounting only one transmitter into a rack, use the connecting bar instead of the second transmitter. Hook the two rack mount �ears� of the transmitter. to the front panels
Secure the rack mount �ears� to the transmitter using two of the supplied recessed head screws (M 3x6) respectively. Secure the connecting bar to one of the rack mount �ears� using two of the supplied recessed head screws (M 6x10). If you are not front mounting the antennas, insert the two covering plugs into the antenna holes of the connecting bar. Slide the transmitter into the 19� rack. Secure the rack mount �ears� to the rack. To mount the transmitter�s antenna connection to the front of the GA 2 rack adapter using the AM 2 antenna mount: Screw the BNC socket of the BNC extension cables to the connecting bar using the supplied plain washer and nut. Connect the BNC connector the rear of the transmitter. to the BNC socket at
Slide the transmitter into the 19� rack. Secure the rack mount �ears� to the rack. Connect the telescopic antenna socket . to the BNC
Pull the end cap to extend the telescopic antenna.
