Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 90°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.
4. Switch the machine on
To switch the machine on, press the ON/OFF button : the mains-on light comes on. The display will show three flashing dashes or a blinking zero.
0 ---
1. Place the laundry in the drum
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
5. Select the desired programme
Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.
90°
E90° E60° E40° 40° 30°
P0004
Rinse hold
30° 40° 30° 40°
60° E60°
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . If you wish to carry out the prewash or a soak phase, pour detergent into the appropriate compartment marked .
40°
30°
6. Select the spin speed or option
Depress the spin speed button required speed or option comes on.
1200 900 700 500
to choose the
: the corresponding light
3. Measure out the additive
If required, pour fabric softener into the compartment marked , and bleach in compartment marked without exceeding the «MAX» mark.
