SENNHEISER EW100G2
Manual de Usuario

Using the components
Switching the components on/off
The ew 100 G2 transmitters and receivers can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON/OFF button or the POWER button (EM 100 G2 only) serves as the ESC (cancel) key, i.e you cancel your entry and return to the standard display. Note: Remove the batteries or the accupack when the units will not be used for extended periods of time. Switching the rack-mount receiver on/off Press the POWER button ´ to switch the receiver on. To switch the receiver off, press the POWER button until �OFF� appears on the display.

´
Switching the bodypack receiver/transmitter on/off Press the two unlocking buttons cover . and open the battery compartment

» µ

Press the ON/OFF button µ to switch the bodypack receiver/transmitter on. The red LED » lights up. To switch the bodypack receiver/transmitter off, press the ON/OFF button µ until �OFF� appears on the display. The red LED » goes off. Close the battery compartment. The battery compartment cover into place with an audible click. locks

¾

º
Switching the plug-on transmitter on/off Press the ON/OFF button LED lights up. to switch the plug-on transmitter on. The red until

To switch the plug-on transmitter off, press the ON/OFF button �OFF� appears on the display. The red LED goes off.

¶ º

70