Using your freezer
Setting the temperature control... Adjusting the temperature control..,
To start, turn control to the middle of the doI Thus setting IS designed to marntain the temperature at 0� near 0 F[ �7 8 C) under normal operating ; ondrtrons 1 Turn control to hrgher number for colder temperatures 2 Turn to lower number for less cold temperatures
Cooling freezer first...
1 Allow freezerto cool 6 to 8 hours before hlling with frozen food. 2 Let It cool overnight before adding large amount of unfrozen food. Note: When freezer IS first started, the compressor vii111 run constantly until the cabinet IS cooled It may take up to 6 to 8 hours or longer, depending on room temperature and the number of times the freezer door 1sopened After the cabinet IS cooled, the compressor will turr ON and OFF as needed to keep the freezer at the proper temperature
The Power Saving Control...
Joerates electric heaters These heaters help pre.~~r~*moisture frc�m formrng on the outside of the fr:,ezer when hurjldrty IS high � Jse the 3FF setting when humidity E iow L .>se the C)N setting only If morsture forms on the >Jslde of the freezer
Changing the light bulb...
To avold posslble shocks, first unplug freezer or turn off electrlclty leadlng to freezer at the maln power supply. 1 Remove the light shield from the side of the control panel Depress the back of the shreld to release the tabs, then pull away 2 Replace bulb wrth a 40-w&t applrance bulb 3 Replace the lrght shield Insert the shield tabs in the slots, then press the shield to snap into place
WARNING:
Adjusting the basket shelf...
To remove basket shelf: 1 Remove food from basket 2 Slide basket straight out to stop 3 Lift front 4 Slide the rest of the way out To replace basket shelf: 1 Fit back of basket shelf on top of guide stops on bottom of gurdes. 2 Lrft front, then slide the basket until it clears the guide stops.
