Plug It In...
3-prong grounding type wall receptacle
A 120 Volt, 60 Hz., AC only, 15 ampere fused electric:11 supply is required. It is recommended that a separate circuit serving only this appliance bl? provided. The receptacle should not be controlled by a wall switch or pull chain. Do not use an extension cord. See i!idividual electrical requirements and grounding instruction sheet in your literature package.
Recommended
Grounding
Method
Using your freezer
Cooling Freezer First... Bottom
To remclve: Lift UC� then pull out. To replace: Set in bottom of freezer. l
l l
Trivet...
Allow freezer to cool 6 to 8 hours before filling with frozen food. Let it cool overnight before adding large amounts of unfrozen food. Frost will form on the shelves. It will form first and be heavier on the top shelves. Note: When freezer is first started the compressor will run constantly until the cabinet is cooled. It may take up to 6 to 8 hours or longer, depending on room temperature and the number of times the freezer door is opened. Afterthe cabinet is cooled the compressor will turn on and off as needed to keep freezer at proper temperature.
Push into place.
Cleaning
your freezer
This freezer should be cleaned when frost has built up to about l/4 inch (6 mm) thickness. Complete defrosting and cleaning should be done at least once a year. In high humidity areas, a freezer may need more frequent defrosting. To clean: I. Unplug power cord. 2. Place a shallow pan on 0oor under drain hole in bottom of freezer. 3. Take out all food and removable parts. Note: Wrap frozen foods and packages eral layers of newspaper and coverwith Food will stay frozen several hours. in sevblanket. Place pans of hot water inside freezer to speed melti~ig of frost. Keep door open. Ice can be removed in large pieces as it melts. Direct air from electric fan into freezer to speed defrosting. Clean freezer according to the following direc:tions. After defrosting: 1. Remove shallow pan from underneath freezer. 2. Plug In power cord. 3