WHIRLPOOL ET20NKXDN10
Manual de Usuario

Removing

the drop-in

door trim

To remove the trim piece: 1. Remove all items from the shelf.

2. Pull straight up on the trim piece at each end.

To replace the trim piece: 1. Locate each end of the trim piece above the trim

pocket opening. 2. Push the trim piece straight down until it stops. 3. Replace items on the shelf.

Removing

the snap-on

door trim

To remove the trim piece: 1. Remove all items from the shelf.

2. Pull out on the inside tab at each end. 3. Lift trim piece straight out.

To replace the trim piece: 1. Line up ends of the trim piece with the button on

the door liner wall. 2. Push trim piece straight back until it snaps securely into place. 3. Replace items on the shelf.

8