WHIRLPOOL ET18NKXDG01
Manual de Usuario

Removing
To remove the meat 1. Slide meat drawer 2. Lift the front of the 3. Slide meat drawer 4. Replace in reverse

the meat

drawer

and cover

Remove the meat drawer and cover for easier cleaning. drawer: out to the stop. meat drawer. out the rest of the way. order.

To remove the cover: 1. Remove meat drawer. 2. Push cover back to release the rear of the cover from the shelf. 3. Tilt cover up at the front. 4. Pull cover forward and out. To replace the cover: 1. Fit notches and rear edge of cover over rear and center crossbars on the shelf. 2. Lower cover into place. 3. Replace the meat drawer.

Remove

meat drawer

before cover.

Removing

the crispers

and crisper

cover
Pull out to the stop, lift the front and pull again.

For your convenience, one crisper is slightly larger than the other. This allows you to store celery and other longer items in a crisper. To remove the crispers: 1. 2. 3. 4. Slide crisper straight out to the stop. Lift the front. Slide out the rest of the way. Replace in reverse order.

To remove the cover: 1. Push up the cover insert from the bottom, then slide out with both hands. 2. Lift front of cover frame. 3. Lift cover frame up and out. To replace the cover: 1. Fit back of cover frame into notch supports on back wall of refrigerator, then lower the front into place. 2. Slide back of cover insert into place, then lower the front.

Remove the cover insert. Lift the cover front, then the back. NOTE: If cover insert is glass, handle it with care. It could be heavy. 11