WHIRLPOOL ET14AKXRWR1
Manual de Usuario

Moving

the meat pan and cover...
Removing: I. Slide meat pan out to stop 2 Lift the front of meat pan. 3 Slide pan the rest of the way out 4 To remove cover, lift it straight up and out. Replacing: 1 TO replace cover, fit notches In cover sides over center shelf support. 2 Lower cover into place. 3 To replace pan, fit edges of pan Into supports on cover 4 Slide meat pan Into place

The meat pan and cover can be removed for cleaning and moved to another shelf, If desired Remove the meat pan first

Changing
WARNING:

the light bulb.. .
Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Shock and injury can occur if eleCtricity remains connected.

1. Reach behind control console to find bulb 2 Remove bulb 3 Replace with a 40.watt appliance bulb TV : r$F 53 2 Gi2 \/

Removing

crispers

and crisper cover.. .
Lift the Front, Then the Bock.

Pull out to stop. Lift the Front and Pull Again.

Removing the Crispers: 1 Slide crisper straight out to stop, Mt front, then sltde the rest of the way out 2. Replace In the reverse order. Removing Cover: I. Loftfront and remove the cover support 2. Lift out cover by pulling up and out. Replacing Cover: I. Fit back of cover into notch supports on walls of refrigerator, then lower front into place. 2 Replace cover support with the long tab towards the front. Note: If support needs adjustment, turn base right to raise, or left to lower.

Removing and adjusting the freezer shelf...
To remove shelf: 1 Ltft front slightly 2 Loftback off supaorts 3 Replace in reverse order To adjust shelf: 1 Remove shelf 2 Remove supports by sliding upwards 3 Replace supporis on desired level 4 Replace shelf

Adjusting
1 2 3 4

the refrigerator

shelves...
Guide Stop Shelf Stop

First, remove fo(xY from shelf Slide shelf straight out to stop Lift front Slide the rest of The NIV out

Replacing Shelf: 1 FINback of sheI+ or� top of guides with wire stops on the bottom of guides 2 Lift front, slide skIelf In until It clears guide stops,

6