Filling with Rinse Aid
Rinse aid ensures that your dishes gleam and are free from spots, and that you glasses are clear.
1
Use only branded rinse aid for dishwashers. Never fill the rinse aid container with any another substance (e.g. concentrated vinegar). This would damage the appliance.
Fill with rinse aid:
� � Prior to using the dishwasher for the first time. When a dark point surrounded by a light ring is to be seen in the indicator window on the container. If there is rinse aid in the container, the indicator window is uniformly dark.
The rinse aid compartment is on the inside of the dishwasher door. 1. Open the door. 2. Press the rinse aid compartment release button with your finger. 3. Fully open the rinse aid compartment lid.
4. Fill with rinse aid exactly up to the level marked �max�; this corresponds to a quantity of approx. 140 ml. 5. Close the lid and press until it locks into place. 6. Wipe up any spilt rinse aid with a cloth. Otherwise too much foam will be formed during the wash.
Adjusting Rinse Aid Dosing
3
As the dishes are washed rinse aid is released from the dispenser into the wash
1. 2. 3. 4. 5. 6.
water. The dose is factory set at 4, and can be adjusted from 1 to 6. Only change the setting if streaks, milky spots or dried on water marks are visible on glasses or crockery. Open the door of the dishwasher. Press the rinse aid compartment release button with your finger. Fully open the rinse aid compartment lid. Set the dose level. Close the lid and press until it locks into place. If rinse aid has run out, wipe up with a cloth. 13