4. PAPER ROLL REPLACEMENT
Never insert paper roll if torn. Doing so will cause paper to jam. Always cut leading edge with scissors first.
1. Insert the leading edge of the paper roll into the opening.
6. BATTERY REPLACEMENT
To install or Replace Batteries When the batteries become weak, the display will work but not the printer. This indicates that you should replace the batteries. 1. Set the power switch to OFF. 2. Remove the battery cover by sliding it in the direction of the arrow on the cover. 3. Replace the batteries. Be sure that the "+" and "-" marks on the battery correspond to the "+" and "-" marks in the calculator. Always put back the 4 batteries at the same time. 4. Put back the battery cover. 5. Press the RESET switch on the back of the unit.
2. Turn the power on and feed the paper by pressing g.
Battery: Heavy-duty manganese battery size AA(or R6) x 4
3. Lift the attached metal paper holder up and insert the paper roll to the paper holder. Note: � If you pull out the power cord to cut electricity completely or replace the batteries, the presently stored tax rate will be cleared.
Do not pull paper backwards as this may cause damage to printing mechanism.
5. HOW TO CONNECT THE AC ADAPTOR
This machine can also be operated on AC power by use of AC adaptor. When the AC adaptor is connected to the calculator the power source is automatically switched over from dry batteries to AC power source. AC adaptor : Model EA-28A iNever use any other AC adaptor except EA-28A)
1
2
Note: Make sure that you turn the calculator�s power off when connecting or disconnecting the AC adaptor. To connect the AC adaptor, follow steps 1 and 2 . To disconnect the AC adaptor, simply reverse the procedure. Caution: Use of other than the AC adaptor EA-28A may apply improper voltage to your SHARP calculator and will cause damage.
EL-1750P PAPER ROLL REPLACEMENT