MAINTENANCE AND CLEANING
The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely. Before any maintenance or cleaning can be carried out, you must DISCONNECT the cooker from the electricity supply.
locking parts
Cleaning materials
Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer. Cleaners that contain bleach should NOT be used as they may dull the surface finishes. A steam cleaner is not to be used. Harsh abrasives should also be avoided.
External cleaning
We recommend for cleaning cleaners type AXION or CIF that do not scratch the surface; after that rinse and dry with a soft cloth. Avoid use of metall objects, steel wool or nylon pads, abrasive or caustic products, or diluents.
Refit the door by reversing the operation described above.
Oven Cavity
The enamelled oven cavity is best cleaned whilst the oven is still warm. Wipe the oven over with a soft cloth soaked in warm soapy water after each use. From time to time it will be necessary to do a more thorough cleaning, using a proprietary oven cleaner.
The Hob Top
The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little washing up liquid has been added. Avoid the use of the following: � household detergent and bleaches; � impregnated pads unsuitable for non-stick saucepans; � steel wool pads; � bath/sink stain removers.
Oven Shelves and shelf support
To clean the oven shelves, and shelf support soak in warm soapy water and remove stubborn marks with a well wetted soap impregnated pad. Rinse well and dry with a soft cloth.
Cleaning the Oven door
For a more complete cleaning of the oven door, it is advisable to disassemble it in the following way: Open the door completely. Turn the two locking parts on the hinge arms to 170°; Partially close the door, to a 30o angle; Lift the door and pull out.
Burners
The burner caps and crowns can be removed for cleaning. Wash the burners caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well-moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove. After cleaning, be sure to wipe dry with a soft cloth.